Realtek PCIe GBE Family Controller Driver & Full Details

How To Fix The Errors Of Realtek PCIe GBE Family Controller Driver?

If you encounter a problem with the Realtek PCIe GBE family controller driver, then it might be because of the following reason for the problem of the Realtek Driver.

• If there is a software problem with the drivers running the LAN.
• If the card of the LAN is already worn out.

If the error is due to any of the above mentioned problems then you can able to fix it in a few effective ways if you happened to experience it. Before that let us know what is the Realtek PCIe GBE family controller driver and its speed.

What Is Realtek PCIe GBE Family Controller?

If you don’t know what is the Realtek PCIe GBE family controller driver, then here we let you know what is the Realtek PCIe GBE family controller driver before going with the Support Fixes.

Realtek PCIe GBE family controller driver is the driver that is used for operating the LAN hardware and this driver controls the wire network functions of your computer and is found in the motherboard.

What Is Realtek PCIe GBE Family Controller Speed?

You may have a doubt, what is the speed of the Realtek PCIe GBE Family Controller? If the network interface of the Realtek Controller is 2.5G Gigabit Ethernet, then the maximum speed is 2.5G/sec and then it can deliver up to 1000Mb/sec if the network interface of the Realtek Controller is 10/100/1000M Gigabit Ethernet.

5 Simple Fixes For Realtek PCIe GBE Family Controller Error

Here are a few of the fixes to perform if you have issues with the Realtek drivers, Follow the given below steps to fix it.

Update Your Realtek Driver

The outdated Realtek driver is one of the reasons that cause issues related to the drivers. You have to check if the drivers are outdated or not. if yes, then this is the first and foremost step is to update the Realtek drivers to the latest version. Then the below-given steps to do so.

• Press and hold on to the “Windows + R” keys to open the Run dialogue box.
• Then type, “devmgmt.msc” to open the device manager.
• On the Network Adapters, if the list of the devices pops up, then locate the Realtek Controller.
• By right-clicking on the Realtek, then select “Update Driver Software”.

• When you update your driver, then choose the Manual mode.
• Now, you have to choose the drivers that you need to update.
• For an update, lets your computer search for the necessary drivers.
• Then install the updates and restart your computer.

After restarting your computer, then check whether the issues of the Realtek drivers are fixed or not.

Download The Appropriate Driver

If you didn’t find any outdated drivers or your computer didn’t detect any driver updates to install, then this is the alternative method to download the Individual drivers through the Realtek website. To download the appropriate drivers the steps are given below.

• Visit the site “realtek.com/downloads“.
• Now, you have to look for the sites that suit your Operating System.
• Then Download the Driver.
• Now, on your Computer install the driver.

The diver’s issue should be fixed if you have updated the driver. If not then this troubleshooting method installing the appropriate driver helps you to fix the driver issue.

Try The System Restore

System Restore is another troubleshooting method so that you can go back to the point where your system software works fine. To restore your system, follow the given below steps.

• Press and hold on to the “Windows + R” keys to open the run dialogue box.
• Now, enter “rstrui.exe” in the text box and click on “OK”.

• Click on the Next button, and then you need to enter the Date, to where you want your system to be traced back.
• Let the computer perform the restore process, once you have set the date.
• Your computer will automatically reboot, after restoring. Now, you need to simply check if the error persists or not.

However, this troubleshooting method will resolve most of your computer problems, Then try this method only when the above-mentioned troubleshooting methods don’t work for you as performing these troubleshooting methods too often have the chance to unstable your device.

Use Registry Editor

If you don’t need to perform the restoration of your system, then you can perform these troubleshooting methods which is the alternative to the system Restore as suggested by the Contributor at the Microsoft Forum.

• First, you have to open the start menu and search for the Command Prompt.
• By right-clicking on the Command Prompt, select run as administrator.
• In the Command Prompt, type the “netcfg –s n” command.
• No, look for the DNI_DNE.
• If you have found the DNI_DNE, then type this command next: “reg delete HKCR\CLSID\{988248f3-a1ad-49bf-9170-676cbbc36ba3}/va /fnetcfg –v –u dni_dne”.

By performing this method you are still encountering the error, or you have gone through the error message, then follow the given below steps.

• Press and hold on to the “Windows + R” keys to open the run dialogue box.
• Now, enter “regedit” in the text box and click on “OK”.

• Then, look for the “HKEY_CLASSES_ROOT\CLSID\{988248f3-a1ad-49bf-9170-676cbbc36ba3}” and delete it.
• Again try the above-given commands in the prompt command.

Replace To The New Adapter

If the driver error persists and is unable to resolve the driver issues, then this might be due to the worn-out driver adapter. Then you need to replace it with the new PCIe adapter. You can buy it from computer stores at a very reasonable price.

Once, you have confirmed that the Realtek issue is the software issue, then you need to replace it with the new PCIe adapter.

Conclusion

The above 5 fixes help you to fix the issue related to the Driver. So, if none of this works for you to fix it then you need to consult the technician. Hope you find this article helpful. If you have any doubts, please text us and stay tuned to Basictricks for more updates.